KC-2000-B 高速创可贴机

本机是一款新型全电脑控制系统，高速创可贴生产线，采用国内外先进技术，设备运行中，电脑全程监测。

The equipement is a new and full computer control system, it is a high-speed production line, uses of advanced technology from abroad, in the operation, the computer system monitoring the whole production.

1. 代替了现在的创可贴设备生产效率低，用工多弊端。KC--2000--B创可贴高速滚切机，速度每分钟0--2000片，相当于现在的创可贴机器5--7倍的产能，操作只需一人。

Instead of the low efficiency of  band-aid equipments greatly, reduces amount of  labour used.KC-2000-B Band-aid packing machine, the production speed is 0-1500 pieces/minute, the production speed as multiple of 5-7 compared with ordinary machine, only needs one operator.

2. 采用松下网络伺服电机，松下运动控制器 ，10寸触摸屏连接，其他电器为德力西电器，软件编程；采用国外先进技术，和我司长期理论于实际经验编排软件程序。设备运行中结合自动相位，前后位置自动调节药带产品的中 心位置，滚dao选用粉末高速钢为材质，加工执dao。外观为不锈钢包装，符合GMP生产要求。

Equipment Overall Configuration: The servo motor of this equipment is which made by Panasonic, motion controller made by Panasonic.10 inch touch screen. Other electrical equipment is Delixi Electrical Equipment. We put the domestic and overseas advanced technologies to use, along with long-term theory and practices programming. The equipment can adjusted the medical pads to a right position automatically. The materials of  hobs are powder high-speed steel.The packaging of this machine is stainless steel. Composite, conform to GMP production requirements.

3. 设备在更换创可贴规格时只需20分钟，dao具安装好后，只需在电脑上输入需要的规格，即可正常生产。

Replacement Specification: The replacement band-aid specification only needs 20minutes, after cutting tool installation, just input the size that you are needed on the touch screen, it can producing normally.

4. 各个原材料防卷装置，采用磁粉制动，和磁粉离合自动控制张力，保证设备在高速运转中的稳定性，

Configuration Assistant:Prevent rolling devices is uses of magnetic powder, along-with magnetic powder clutch, it can adjusted tension automatically, can ensure the equipment running stability at the high speed.

5.详细参数配置；Main Technical Parameters: